Shop headings: New Spares | Used Spares | Accessories | Brands
Complete electronic ignition kit containing alternator mounted ignition pickup, fittings and amplifier unit. Works with standard 3 Ohm 12 volt coils and can be used to replace points or Motoplat ignition on models with Saprisa charging systems. The pickups for this kit are mounted on the alternator stator. Supplied with instructions in German with wiring diagrams.
2 year warranty on Sachse ignition kits
Eliminates vague timing due to worn distributors on big twins. Preloaded with nine ignition curves, two of which are designed for twin plugged bikes. Once fitted no further adjustment should be necessary. See this link for fitting instructions. Note that if you are replacing a Digiplex system you will also need to replace your 'square' coils with higher impedance 12 volt coils e.g. ELA31165
This part is available by special order, request a quote
£395.00
INC VAT
£329.17 EX VAT
Brand new genuine Valeo starter motor and solenoid suitable as a direct replacement for Guzzi Valeo and Bosch 8 or 9 teeth starter motors. You may need to fit hex headed neutral switch bolts on some pre 1990 models to make room for the solenoid. Our part number for the bolt is SSA06016
Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology, also see https://www.thisoldtractor.com/moto_guzzi_loopframe_starter_-_how_to_replace_the_magneti_marelli_starter_with_a_valeo.html for advice on this upgrade.
This is a genuine Valeo starter made in the EU- please do not confuse with the cheap Chinese copies that sometimes appear on eBay.
Supercedes Guzzi refs. 12730705, 14730554 and 14730705
Please note you can get a discount of £30 on this item if you part exchange your existing faulty starter motor. See ELA30837 for less expensive alternative part
This part is due back in stock soon, call 01484 841395 to reserve yours
30730711 GU30730711 30 73 07 11
3073 0711 3073.0711 30.73.07.11
£231.00
INC VAT
£192.50 EX VAT
Brand new right hand original "Lego" type switchgear and twistgrip with switches for starter and run/kill.
Previously unavailable new and ideal for your restoration project.
Comes with attached 4 pin molex connector, molex pins and rubber boot, ready to be plugged into your standard loom.
Twistgrip for standard dual throttle cables.
See ELA17061 and ELA14055 for left hand switches.
Sorry, this part is no longer available.
Sorry this item is out of production
Pair of performance Dyna 12 volt 5 ohm single lead ignition coils with angled HT lead socket. These are a cooler running coil that offer improved starting and performance
Dyna Performance Replacment Coils are high tech, top quality coils, designed for maximum performance. They produce spark voltages in excess of 30,000 volts and spark energies second to none. Dynatek coils are available in a wide variety of resistances and output configurations to allow easy replacement of stock coils. Dynatek coils work with factory electronic ignitions, points, and aftermarket ignitions.
These are a different size and shape from the original coils so you will need to fabricate a suitable coil mount.
Individual coils available by special order, call us for details. See ELA00001 for crimp on HT lead connector
This part is due back in stock soon, call 01484 841395 to reserve yours
1471650
£190.00
INC VAT
£158.33 EX VAT
Round 12v two pin flasher relay for LED indicators. For use with aftermarket LED indicators
Includes rubber for attaching to bike.
NB Only suitable for LED indicators. Will not work in modern V7 models because these do not utilise a flasher unit.
This part is available by special order, request a quote
£12.00
INC VAT
£10.00 EX VAT
Prolong battery life with this 9 stage smart battery charger, suitable for 6v, 12v AGM and lead acid batteries.
Weatherproof - suitable for use outside 6V / 12V 1A Auto-sensing charger. Suits all AGM, Lead Acid, Calcium and Gel batteries Charges 6v and 12v batteries Ring terminal and alligator clip harnesses included Spark proof Maintains full charge Simple, connect and wait for green light Overload / Short circuit protection See ACA96001 for a spare set of charging leads (e.g. for a separate bike).
This part is due back in stock soon, call 01484 841395 to reserve yours
£57.00
INC VAT
£47.50 EX VAT
Replacement solenoid for original Bosch starter motor.
Note that this solenoid has a bright zinc finsh
This part is due back in stock soon, call 01484 841395 to reserve yours
14730554 GU14730554 14 73 05 54
1473 0554 1473.0554 14.73.05.54
£37.50
INC VAT
£31.25 EX VAT
Ignition switch bracket, attaches to top frame tube
See ELA17735 for ignition switch
This part is available by special order, request a quote
17736450 GU17736450 17 73 64 50
1773 6450 1773.6450 17.73.64.50
£45.00
INC VAT
£37.50 EX VAT
Complete shallow bowl 190mm gloss black headlight unit.
Fits Le Mans 1 headlamp cowling FAA99575. Supplied complete with bulb and three short wires (without connectors). NB mounting holes will need drilling out to 10mm if fitting T3 type indicator stems. Neutral beam pattern and not E Marked
This part is due back in stock soon, call 01484 841395 to reserve yours
£95.00
INC VAT
£79.17 EX VAT
Pair of high performance Dyna 12 volt 5 ohm dual lead ignition coils with angled HT lead socket. These are a performance coil which offer improved starting and performance for twin plugged models
Dyna Performance Replacment twin plug coils are high tech, top quality coils, designed for maximum performance. They produce spark voltages in excess of 30,000 volts and spark energies second to none. Dynatek coils are available in a wide variety of resistances and output configurations to allow easy replacement of stock coils. Dynatek coils work with factory electronic ignitions, points, and aftermarket ignitions.
These are a different size and shape from the original coils so you will need to fabricate a suitable coil mount. Guzziology recommends using electronic ignition with these coils as points may not be up to triggering these coils. See ELA00001 for crimp on HT lead connector.
Individual coils available by special order, call us for details
This part is available by special order, request a quote
1471650
£190.00
INC VAT
£158.33 EX VAT